[FLASH-USERS] plots for 3D

[ipatov at dtm.ciw.edu]

I have made a 3D cartesian run for 2 levels in FLASH2.5
(sphere + moving front of material).

   Does somebody know that the below problems with making plots
are real or  is it possible to avoid them?

  It was not possible to make any plot for any files for ms_4 and other ms.
  It was not possible to show blocks and make contours.

  There were normal plots for x-y  and y-z;
but for the first plots  for x-z, 'density' and 'pressure' were empty;
they began to be present on later x-z plots, but only outside the
initial sphere, which remained empty (but it was not empty for x-y and y-z).

  For full obtained files 'chk', I was able to plot only histograms and
a plot for 'pres', but not any other plots.
Plots of 'dens' were made only for 'plt' files, but I was not
able to plot 'pres' for 'plt' files.
   For 2D, I had no such problems.

Best regards
Sergei
PS. I tried to run ./setup sedov -auto -3d (to check plots for this problem),
but it crashed before it made an initial plot.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: dens-xy-0000.ps
Type: application/postscript
Size: 39807 bytes
Desc: not available
Url : http://flash.uchicago.edu/pipermail/flash-users/attachments/20070420/09ff1745/attachment-0003.ps 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: dens-xz-0000.ps
Type: application/postscript
Size: 38034 bytes
Desc: not available
Url : http://flash.uchicago.edu/pipermail/flash-users/attachments/20070420/09ff1745/attachment-0004.ps 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: dens-yz-0000.ps
Type: application/postscript
Size: 39890 bytes
Desc: not available
Url : http://flash.uchicago.edu/pipermail/flash-users/attachments/20070420/09ff1745/attachment-0005.ps