Generated from /asc/asci2/site/flashcode/secure/release_4p6/source/Grid/Grid_bcApplyToRegionSpecialized.F90 with ROBODoc v4.99.8 on Tue Oct 15 13:28:04 2019


[Functions] source/Grid/Grid_bcApplyToRegionSpecialized





  call Grid_bcApplyToRegionSpecialized(integer(IN)  :: bcType,
                                       integer(IN)  :: gridDataStruct,
                                       integer(IN)  :: guard,
                                       integer(IN)  :: axis,
                                       integer(IN)  :: face,
                                       real(INOUT)  :: regionData(:,:,:,:),
                                       integer(IN)  :: regionSize(:),
                                       logical(IN)  :: mask(:),
                                       logical(OUT) :: applied,
                                       integer(IN)  :: blockHandle,
                                       integer(IN)  :: secondDir,
                                       integer(IN)  :: thirdDir,
                                       integer(IN)  :: endPoints(LOW:HIGH,MDIM),
                                       integer(IN)  :: blkLimitsGC(LOW:HIGH,MDIM),
                              OPTIONAL,integer(IN)  :: idest )


  Applies the boundary conditions to the specified data structure.
  The routine is handed a region that has been extracted from the
  data structure, on which it should apply the boundary conditions. 
  The direction along which the BC are to be applied is always the first
  dimension in the given region, and the last dimension contains the
  the variables in the data structure. The middle two dimension contain
  the size of the region along the two dimensions of the physical grid
  that are not having the BC applied.

  This routine applies the boundary conditions on a given face (lowerface
  or upperface) along a given axis, by using and setting values
  for all variables in the gridDataStruct that are not masked out. The 
  argument "mask" has the information about the masked variables.
   Where masked(variables)
     If (face=LOW)  
       regionData(1:guard,:,:,variables) =  boundary values
     If (face=HIGH) 
       regionData(regionSize(BC_DIR)-guard+1:regionSize(BC_DIR),:,:,variables) =  boundary values



    bcType - the type of boundary condition being applied.
    gridDataStruct - the Grid dataStructure, should be given as
                     one of the constants CENTER, FACEX, FACEY, FACEZ.
    guard -    number of guard cells
    axis  - the direction along which to apply boundary conditions,
            can take values of IAXIS, JAXIS and KAXIS
    face    -  can take values LOW and HIGH, defined in constants.h,
               to indicate whether to apply boundary on lowerface or 
    regionData     : the extracted region from a block of permanent storage of the 
                     specified data structure. Its size is given by regionSize.
                     NOTE that the first three dimensions of this array do not necessarily
                     correspond to the (IAXIS, JAXIS, KAXIS) directions in this order;
                     rather, the axes are permuted such that the first index
                     of regionData always corresponds to the direction given by axis.
                     See regionSize for more information.
    regionSize     : regionSize(BC_DIR) contains the size of each row of data
                     in the regionData array.  With row we mean here an array slice
                     regionData(:,I2,I3,VAR), corresponding to cells that are situated
                     along a line in the 'axis' direction. For the common case of guard=4,
                     (e.g., when gridDataStruct=CENTER) and either 8 or 9 for face-
                     centered data, depending on the direction given by axis.
                     regionSize(SECOND_DIR) contains the number of rows along the
                     second direction, and regionSize(THIRD_DIR) has the number of rows
                     along the third direction. (See also below under secondDir,thirdDir
                     for the meaning of second and third direction; and see also NOTE (1)
                     Finally, regionSize(GRID_DATASTRUCT) contains the
                     number of variables in the data structure.
  mask - if present, boundary conditions are to be applied only to selected variables.
         However, an implementation of this interface may ignore the mask argument;
         a mask should be understood as a possible opportunity for optimization which
         an implementation may ignore.
         Specifying a mask does not mean that previous values of other variables in
         guard cells will be left undisturbed.
    applied - is set true if this routine has handled the given bcType, otherwise it is 
              set to false.


  blockHandle - Handle for the block for which guard cells are to be filled.
              In grid implementations other than Paramesh 4, this is always
              a local blockID.

              With Paramesh 4:
              This may be a block actually residing on the local processor,
              or the handle may refer to a block that belong to a remote processor
              but for which cached information is currently available locally.
              The two cases can be distinguished by checking whether 
              (blockHandle .LE. lnblocks): this is true only for blocks that
              reside on the executing processor.
              The block ID is available for passing on to some handlers for 
              boundary conditions that may need it, ignored in the default 

  secondDir,thirdDir -   Second and third coordinate directions.
                         These are the transverse directions perpendicular to
                         the sweep direction.  SecondDir and thirdDir give
                         the meaning of the second and third dimension,
                         respectively, of the regionData array.
                         This is not needed for simple boundary condition types
                         such as REFLECTING or OUTFLOW, It is provided for
                         convenience so that more complex boundary condition
                         can make use of it.
                         The values are currently fully determined by the sweep
                         direction bcDir as follows:
                          bcDir   |    secondDir       thirdDir
                          IAXIS   |    JAXIS             KAXIS
                          JAXIS   |    IAXIS             KAXIS
                          KAXIS   |    IAXIS             JAXIS

  endPoints - starting and endpoints of the region of interest.
              See also NOTE (1) below.

  blkLimitsGC - the starting and endpoint of the whole block including
                the guard cells, as returned by Grid_getBlkIndexLimits.
              See also NOTE (1) below.

  idest - Only meaningful with PARAMESH 3 or later.  The argument indicates which slot
          in its one-block storage space buffers ("data_1blk.fh") PARAMESH is in the
          process of filling.
          The following applies when guard cells are filled as part of regular
          Grid_fillGuardCells processing (or, in NO_PERMANENT_GUARDCELLS mode,
          in order to satisfy a Grid_getBlkPtr request): The value is 1 if guard cells
          are being filled in the buffer slot in UNK1 and/or FACEVAR{X,Y,Z}1 or WORK1
          that will end up being copied to permanent block data storage (UNK and/or
          FACEVAR{X,Y,Z} or WORK, respectively) and/or returned to the user.
          The value is 2 if guard cells are being filled in the alternate slot in
          the course of assembling data to serve as input for coarse-to-fine
          When guard cells are being filled in order to provide input data for
          coarse-to-fine interpolation as part of amr_prolong processing (which
          is what happens when Grid_updateRefinement is called for an AMR Grid),
          the value is always 1.

          In other words, an implementation can nearly always ignore this optional
          argument.  As of FLASH 3.0, it is only used internally within the
          Grid unit and is handled by the GridBoundaryConditions/Grid_bcApplyToRegion
          implementation. It is used within the Grid unit by a Multigrid GridSolver
          implementation which requires some special handling, but this is only
          applied to the WORK data structure.  The argument has been added to the
          Grid_bcApplyToRegionSpecialized interface for consistency with


 (1)        NOTE that the second indices of the endPoints and
            blkLimitsGC arrays count the (IAXIS, JAXIS, KAXIS)
            directions in the usual order, not permuted as in

 (2)        The preprocessor symbols appearing in this description
            as well as in the dummy argument declarations (i.e.,
            all the all-caps token (other than IN and OUT)) are
            defined in constants.h.

 (3)        This routine is common to all the mesh packages supported.
            The mesh packages extract the small vectors relevant to
            boundary conditions calculations from their Grid data