Runtime Parameters Documentation for FLASH Release 4.6.1


physics/sourceTerms/Heat
    useHeat [BOOLEAN] [FALSE]
        runtime control for turning the heat on or off

physics/sourceTerms/Heat/HeatMain/Neutrino
    Lneut [REAL] [0.0]
        Valid Values: Unconstrained
        Parametric neutrino luminosity
    Tneut [REAL] [0.0]
        Valid Values: Unconstrained
        Neutrino temperature in MeV
    bounce_time [REAL] [0.0]
        Valid Values: Unconstrained
        The time of bounce in s.
    heatTimeFac [REAL] [1.0e4]
        Valid Values: Unconstrained
        For adjusting the heating time step size

physics/sourceTerms/Heat/HeatMain/RadioactiveDecay
    ht_applyHeating [BOOLEAN] [TRUE]
        Apply heating deposition to total energy?
    qheat [REAL] [0.0E0]
        Valid Values: Unconstrained
        intensity of the transient heating
    sigheat [REAL] [1.0E0]
        Valid Values: Unconstrained
        sigma of the transient heating
    statheat [REAL] [1.0E-5]
        Valid Values: Unconstrained
        stationary heating
    t0heat [REAL] [-1.0E0]
        Valid Values: Unconstrained
        switch off time of the transient
    tau [REAL] [1.0E0]
        Valid Values: Unconstrained
        decay time of the transient
    theatmin [REAL] [1.0E3]
        Valid Values: Unconstrained
        Min heating temperature
    tstar [REAL] [-1.0E0]
        Valid Values: Unconstrained
        start time of the transient
    useHeat [BOOLEAN] [TRUE]

    x0heat [REAL] [1.0E0]
        Valid Values: Unconstrained
        X location of the transient heating
    y0heat [REAL] [1.0E0]
        Valid Values: Unconstrained
        Y location of the transient heating
    z0heat [REAL] [1.0E0]
        Valid Values: Unconstrained
        Z location of the transient heating

physics/sourceTerms/Heatexchange
    useHeatexchange [BOOLEAN] CONSTANT [FALSE]


physics/sourceTerms/Heatexchange/HeatexchangeMain
    hx_logLevel [INTEGER] [700]
        Valid Values: 0 to INFTY
        controls the level of logging for some conditions. See Heatexchange.h
        for relevant HX_LOGLEVEL_* definitions.
    useHeatexchange [BOOLEAN] [TRUE]


physics/sourceTerms/Heatexchange/HeatexchangeMain/ConstCoulomb
    hx_coulombLog [REAL] [1.0]
        Valid Values: 0.0 to INFTY

    hx_couplingConst13 [REAL] [0.0]
        Valid Values: 0.0 to INFTY

    hx_couplingConst23 [REAL] [1.0]
        Valid Values: 0.0 to INFTY

    hx_dtFactor [REAL] [0.5]
        Valid Values: 0.0+ to INFTY

    hx_relTol [REAL] [-1.0]
        Valid Values: Unconstrained
        relative tolerance for temperature errors introduced by HeatExchange.
        This runtime parameter affects the time step computed by
        Heatexchange_computeDt. Basically, if the max (abs) temperature
        adjustment that would be introduced in any nonzero component in any cell
        is less than hx_relTol, then the time step limit is relaxed. Set to a
        negative value to inherite the value of runtime parameter eos_tolerance.

physics/sourceTerms/Heatexchange/HeatexchangeMain/Constant
    hx_couplingConst12 [REAL] [1.0]
        Valid Values: 0.0 to INFTY
        ion-electron heat exchange coupling constant
    hx_couplingConst13 [REAL] [0.0]
        Valid Values: -1.0, 0.0 to INFTY
        ion-radiation heat exchange coupling constant (usually ignored)
    hx_couplingConst23 [REAL] [1.0]
        Valid Values: -1.0, 0.0 to INFTY
        electron-radiation heat exchange coupling constant, representing
        emission and absorption effects
    hx_dtFactor [REAL] [0.5]
        Valid Values: 0.0+ to INFTY

    hx_relTol [REAL] [-1.0]
        Valid Values: Unconstrained
        relative tolerance for temperature errors introduced by HeatExchange.
        This runtime parameter affects the time step computed by
        Heatexchange_computeDt. Basically, if the max (abs) temperature
        adjustment that would be introduced in any nonzero component in any cell
        is less than hx_relTol, then the time step limit is relaxed. Set to a
        negative value to inherite the value of runtime parameter eos_tolerance.

physics/sourceTerms/Heatexchange/HeatexchangeMain/Immediate
    hx_applyToRadiation [BOOLEAN] [FALSE]
        Does the Immediate Heatexchange implementation apply to radiation?

physics/sourceTerms/Heatexchange/HeatexchangeMain/LeeMore
    hx_dtFactor [REAL] [0.5]
        Valid Values: 0.0+ to INFTY

    hx_ieTimeCoef [REAL] [1.0]
        Valid Values: 0.0 to INFTY
        Constant coefficient for scaling ion/ele coupling time
    hx_relTol [REAL] [-1.0]
        Valid Values: Unconstrained
        relative tolerance for temperature errors introduced by HeatExchange.
        This runtime parameter affects the time step computed by
        Heatexchange_computeDt. Basically, if the max (abs) temperature
        adjustment that would be introduced in any nonzero component in any cell
        is less than hx_relTol, then the time step limit is relaxed. Set to a
        negative value to inherite the value of runtime parameter eos_tolerance.

physics/sourceTerms/Heatexchange/HeatexchangeMain/Spitzer
    hx_dtFactor [REAL] [0.5]
        Valid Values: 0.0+ to INFTY

    hx_ieTimeCoef [REAL] [1.0]
        Valid Values: 0.0 to INFTY
        Constant coefficient for scaling ion/ele coupling time
    hx_relTol [REAL] [-1.0]
        Valid Values: Unconstrained
        relative tolerance for temperature errors introduced by HeatExchange.
        This runtime parameter affects the time step computed by
        Heatexchange_computeDt. Basically, if the max (abs) temperature
        adjustment that would be introduced in any nonzero component in any cell
        is less than hx_relTol, then the time step limit is relaxed. Set to a
        negative value to inherite the value of runtime parameter eos_tolerance.