physics/sourceTerms/Heat useHeat [BOOLEAN] [FALSE] runtime control for turning the heat on or off physics/sourceTerms/Heat/HeatMain/Neutrino Lneut [REAL] [0.0] Valid Values: Unconstrained Parametric neutrino luminosity Tneut [REAL] [0.0] Valid Values: Unconstrained Neutrino temperature in MeV bounce_time [REAL] [0.0] Valid Values: Unconstrained The time of bounce in s. heatTimeFac [REAL] [1.0e4] Valid Values: Unconstrained For adjusting the heating time step size physics/sourceTerms/Heat/HeatMain/RadioactiveDecay ht_applyHeating [BOOLEAN] [TRUE] Apply heating deposition to total energy? qheat [REAL] [0.0E0] Valid Values: Unconstrained intensity of the transient heating sigheat [REAL] [1.0E0] Valid Values: Unconstrained sigma of the transient heating statheat [REAL] [1.0E-5] Valid Values: Unconstrained stationary heating t0heat [REAL] [-1.0E0] Valid Values: Unconstrained switch off time of the transient tau [REAL] [1.0E0] Valid Values: Unconstrained decay time of the transient theatmin [REAL] [1.0E3] Valid Values: Unconstrained Min heating temperature tstar [REAL] [-1.0E0] Valid Values: Unconstrained start time of the transient useHeat [BOOLEAN] [TRUE] x0heat [REAL] [1.0E0] Valid Values: Unconstrained X location of the transient heating y0heat [REAL] [1.0E0] Valid Values: Unconstrained Y location of the transient heating z0heat [REAL] [1.0E0] Valid Values: Unconstrained Z location of the transient heating physics/sourceTerms/Heatexchange useHeatexchange [BOOLEAN] CONSTANT [FALSE] physics/sourceTerms/Heatexchange/HeatexchangeMain hx_logLevel [INTEGER] [700] Valid Values: 0 to INFTY controls the level of logging for some conditions. See Heatexchange.h for relevant HX_LOGLEVEL_* definitions. useHeatexchange [BOOLEAN] [TRUE] physics/sourceTerms/Heatexchange/HeatexchangeMain/ConstCoulomb hx_coulombLog [REAL] [1.0] Valid Values: 0.0 to INFTY hx_couplingConst13 [REAL] [0.0] Valid Values: 0.0 to INFTY hx_couplingConst23 [REAL] [1.0] Valid Values: 0.0 to INFTY hx_dtFactor [REAL] [0.5] Valid Values: 0.0+ to INFTY hx_relTol [REAL] [-1.0] Valid Values: Unconstrained relative tolerance for temperature errors introduced by HeatExchange. This runtime parameter affects the time step computed by Heatexchange_computeDt. Basically, if the max (abs) temperature adjustment that would be introduced in any nonzero component in any cell is less than hx_relTol, then the time step limit is relaxed. Set to a negative value to inherite the value of runtime parameter eos_tolerance. physics/sourceTerms/Heatexchange/HeatexchangeMain/Constant hx_couplingConst12 [REAL] [1.0] Valid Values: 0.0 to INFTY ion-electron heat exchange coupling constant hx_couplingConst13 [REAL] [0.0] Valid Values: -1.0, 0.0 to INFTY ion-radiation heat exchange coupling constant (usually ignored) hx_couplingConst23 [REAL] [1.0] Valid Values: -1.0, 0.0 to INFTY electron-radiation heat exchange coupling constant, representing emission and absorption effects hx_dtFactor [REAL] [0.5] Valid Values: 0.0+ to INFTY hx_relTol [REAL] [-1.0] Valid Values: Unconstrained relative tolerance for temperature errors introduced by HeatExchange. This runtime parameter affects the time step computed by Heatexchange_computeDt. Basically, if the max (abs) temperature adjustment that would be introduced in any nonzero component in any cell is less than hx_relTol, then the time step limit is relaxed. Set to a negative value to inherite the value of runtime parameter eos_tolerance. physics/sourceTerms/Heatexchange/HeatexchangeMain/Immediate hx_applyToRadiation [BOOLEAN] [FALSE] Does the Immediate Heatexchange implementation apply to radiation? physics/sourceTerms/Heatexchange/HeatexchangeMain/LeeMore hx_dtFactor [REAL] [0.5] Valid Values: 0.0+ to INFTY hx_ieTimeCoef [REAL] [1.0] Valid Values: 0.0 to INFTY Constant coefficient for scaling ion/ele coupling time hx_relTol [REAL] [-1.0] Valid Values: Unconstrained relative tolerance for temperature errors introduced by HeatExchange. This runtime parameter affects the time step computed by Heatexchange_computeDt. Basically, if the max (abs) temperature adjustment that would be introduced in any nonzero component in any cell is less than hx_relTol, then the time step limit is relaxed. Set to a negative value to inherite the value of runtime parameter eos_tolerance. physics/sourceTerms/Heatexchange/HeatexchangeMain/Spitzer hx_dtFactor [REAL] [0.5] Valid Values: 0.0+ to INFTY hx_ieTimeCoef [REAL] [1.0] Valid Values: 0.0 to INFTY Constant coefficient for scaling ion/ele coupling time hx_relTol [REAL] [-1.0] Valid Values: Unconstrained relative tolerance for temperature errors introduced by HeatExchange. This runtime parameter affects the time step computed by Heatexchange_computeDt. Basically, if the max (abs) temperature adjustment that would be introduced in any nonzero component in any cell is less than hx_relTol, then the time step limit is relaxed. Set to a negative value to inherite the value of runtime parameter eos_tolerance.

High-Energy Density Physics

Thermonuclear-Powered Supernovae

Fluid-Structure Interaction

Implicit Solvers

Code Requests

Download

Contributed code

Flash Test downloads

Visualization downloads

Documentation and User Support

Publications

FLASH internal

The Flash Center for Computational Science is based at the University of Chicago and is supported by U.S. DOE and NSF.